UCP209-26, PILLOW BLOCK-HIGH CENTER
SKU: UCP209-26 IDC
Manufacturer part number: IDC UCP209-26
In-Stock Quantity: in stock
Quick overview
UCP209-26, PILLOW BLOCK-HIGH CENTER SETSCREWS
Overview
Product Attributes
IDC UCP209-26
IDC Select Standard-Duty Pillow Block
Set Screw Locking Design
Features
- One-Piece Cast Iron Housing - Solid Base
- Wide Inner Ring Bearing
- Dual Heavy-Duty Slinger-Type Contact Seals
- Cup Point Set Screws 120º Apart Lock Unit Securely to Shaft
- Fully Self-Aligning
| Shaft Diameter Dim. d (in) (fract) | 1-5/8 |
| Shaft Diameter Dim. d (mm) | 41.275 |
| Base to Shaft Centerline Dim. H (in) (fract) | 2-1/8 |
| Base to Shaft Centerline Dim. H (mm) | 53.98 |
| Housing Length Dim. L (in) (fract) | 7-15/32 |
| Housing Length Dim. L (mm) | 190 |
| Mounting Hole Center-to-Center Dim. J (in) (fract) | 5-3/4 |
| Mounting Hole Center-to-Center Dim. J (mm) | 146 |
| Base Width Dim. A (in) (fract) | 2-1/8 |
| Base Width Dim. A (mm) | 54 |
| Mounting Hole Diameter Dim. N (in) (fract) | 43/64 |
| Mounting Hole Diameter Dim. N (mm) | 17 |
| Mounting Slot Length Dim. N1 (in) (fract) | 25/32 |
| Mounting Slot Length Dim. N1 (mm) | 20 |
| Housing Base Thickness Dim. H1 (in) (fract) | 25/32 |
| Housing Base Thickness Dim. H1 (mm) | 20 |
| Housing Height Dim. H0 (in) (fract) | 4-11/64 |
| Housing Height Dim. H0 (mm) | 106 |
| Bearing Inner Race Width Dim. B (in) | 1.94 |
| Bearing Inner Race Width Dim. B (mm) | 49.2 |
| Bearing Inner Race Width - Short Side Dim. S (in) | 0.748 |
| Bearing Inner Race Width - Short Side Dim. S (mm) | 19 |
| Bolt Size (in) | 1/2 |
| Bolt Size (mm) | M14 |
| Insert No. | UC209-26 |
| Weight (lb) | 4.94 |
| Weight (kg) | 2.24 |
| Basic Dynamic Load Rating (Cr) lbs | 7103.96 |
| Basic Dynamic Load Rating (Cr) kN | 31.6 |
| Basic Static Load Rating (Cor) lbs | 4631.06 |
| Basic Static Load Rating (Cor) kN | 20.6 |
| Locking Device | Set Screw |
| Grease Fitting | 1/8 - 27 NPT |