UCFSS207-20SS, 4-BOLT FLANGE UNIT-STAINLESS STEEL
SKU: UCFSS207-20SS IDC
Manufacturer part number: IDC UCFSS207-20SS
In-Stock Quantity: in stock
Quick overview
UCFSS207-20SS, 4-BOLT FLANGE UNIT-STAINLESS STEEL WITH STAINLESS STEEL INSERT
Overview
Product Attributes
IDC UCFSS207-20SS
IDC Select Standard-Duty Stainless Steel Wash-Down 4-Bolt Flange
Set Screw Locking Design
Features
- Stainless Steel Housing - Solid Base - Polished Finish
- Stainless Steel Wide Inner Ring Bearing
- All Stainless Steel Insert - Balls & Rings 440, Retainer & Slinger 302, Set Screws 304
- Dual Heavy-Duty Slinger-Type Contact Seals & Food-Grade Grease
- Cup Point Set Screws 120º Apart Lock Unit Securely to Shaft
- Fully Self-Aligning
| Shaft Diameter Dim. d (in) (fract) | 1-1/4 |
| Shaft Diameter Dim. d (mm) | 31.75 |
| Housing Length Dim. L (in) (fract) | 4-39/64 |
| Housing Length Dim. L (mm) | 117 |
| Mounting Hole Center-to-Center Dim. J (in) (fract) | 3-5/8 |
| Mounting Hole Center-to-Center Dim. J (mm) | 92 |
| Mounting Base to Bearing Center Dim. A2 (in) (fract) | 3/4 |
| Mounting Base to Bearing Center Dim. A2 (mm) | 19 |
| Housing Base Thickness Dim. A1 (in) | 0.59 |
| Housing Base Thickness Dim. A1 (mm) | 15 |
| Flange Height Dim. A (in) | 1.34 |
| Flange Height Dim. A (mm) | 34 |
| Mounting Hole Diameter Dim. N (in) (fract) | 35/64 |
| Mounting Hole Diameter Dim. N (mm) | 14 |
| Flange Assembly Height Dim. E (in) (fract) | 1-3/4 |
| Flange Assembly Height Dim. E (mm) | 44.4 |
| Bearing Inner Race Width - Short Side Dim. S (in) | 0.6890 |
| Bearing Inner Race Width - Short Side Dim. S (mm) | 17.5 |
| Bolt Size (in) | 7/16 |
| Bolt Size (mm) | M12 |
| Insert No. | SSUC207-20 |
| Weight (lb) | 4.10 |
| Weight (kg) | 1.86 |
| Basic Dynamic Load Rating (Cr) lbs | 5777.59 |
| Basic Dynamic Load Rating (Cr) Kn | 25.7 |
| Basic Static Load Rating (Cor) lbs | 3439.58 |
| Basic Static Load Rating (Cor) kN | 15.3 |
| Locking Device | Set Screw |
| Stainless Steel Grease Fitting | 1/8-27 NPT |