UCP212-36, PILLOW BLOCK-HIGH CENTER
SKU: UCP212-36 IDC
Manufacturer part number: IDC UCP212-36
In-Stock Quantity: in stock
Quick overview
UCP212-36, PILLOW BLOCK-HIGH CENTER SETSCREWS
Overview
Product Attributes
IDC UCP212-36
IDC Select Standard-Duty Pillow Block
Set Screw Locking Design
Features
- One-Piece Cast Iron Housing - Solid Base
- Wide Inner Ring Bearing
- Dual Heavy-Duty Slinger-Type Contact Seals
- Cup Point Set Screws 120º Apart Lock Unit Securely to Shaft
- Fully Self-Aligning
| Shaft Diameter Dim. d (in) (fract) | 2-1/4 |
| Shaft Diameter Dim. d (mm) | 57.15 |
| Base to Shaft Centerline Dim. H (in) (fract) | 2-3/4 |
| Base to Shaft Centerline Dim. H (mm) | 69.85 |
| Housing Length Dim. L (in) (fract) | 9-1/2 |
| Housing Length Dim. L (mm) | 241 |
| Mounting Hole Center-to-Center Dim. J (in) (fract) | 7-1/4 |
| Mounting Hole Center-to-Center Dim. J (mm) | 184 |
| Base Width Dim. A (in) (fract) | 2-3/4 |
| Base Width Dim. A (mm) | 70 |
| Mounting Hole Diameter Dim. N (in) (fract) | 25/32 |
| Mounting Hole Diameter Dim. N (mm) | 20 |
| Mounting Slot Length Dim. N1 (in) (fract) | 29/32 |
| Mounting Slot Length Dim. N1 (mm) | 23 |
| Housing Base Thickness Dim. H1 (in) (fract) | 63/64 |
| Housing Base Thickness Dim. H1 (mm) | 25 |
| Housing Height Dim. H0 (in) (fract) | 5-7/16 |
| Housing Height Dim. H0 (mm) | 138 |
| Bearing Inner Race Width Dim. B (in) | 2.56 |
| Bearing Inner Race Width Dim. B (mm) | 65.1 |
| Bearing Inner Race Width - Short Side Dim. S (in) | 1 |
| Bearing Inner Race Width - Short Side Dim. S (mm) | 25.4 |
| Bolt Size (in) | 5/8 |
| Bolt Size (mm) | M16 |
| Insert No. | UC212-36 |
| Weight (lb) | 11.09 |
| Weight (kg) | 5.03 |
| Basic Dynamic Load Rating (Cr) lbs | 10723.39 |
| Basic Dynamic Load Rating (Cr) kN | 47.7 |
| Basic Static Load Rating (Cor) lbs | 7396.21 |
| Basic Static Load Rating (Cor) kN | 32.9 |
| Locking Device | Set Screw |
| Grease Fitting | 1/8 - 27 NPT |