UCPK204-12 R3, STANDARD DUTY PILLOW BLOCK
SKU: UCPK204-12 R3 IDC
Manufacturer part number: IDC UCPK204-12 R3
In-Stock Quantity: in stock
Quick overview
UCPK204-12 R3, STANDARD DUTY PILLOW BLOCK LOW CENTER HEIGHT-SET SCREW LOCKING-TRIPLE LIP SEAL
Overview
Product Attributes
IDC UCPK204-12 R3
IDC Select Standard-Duty Low-Base Pillow Block
Set Screw Locking Design
Features
- One-Piece Cast Iron Housing - Solid Base
- Wide Inner Ring Bearing
- Triple Lip Seals
- Cup Point Set Screws 120º Apart Lock Unit Securely to Shaft
- Fully Self-Aligning
| Shaft Diameter Dim. d (in) (fract) | 3/4 |
| Shaft Diameter Dim. d (mm) | 19.05 |
| Shaft Height Dim. H (in) (fract) | 1-1/4 |
| Shaft Height Dim. H (mm) | 31.75 |
| Housing Length Dim. L (in) (fract) | 5 |
| Housing Length Dim. L (mm) | 127 |
| Mounting Hole Center-to-Center Dim. J (in) (fract) | 3-3/4 |
| Mounting Hole Center-to-Center Dim. J (mm) | 98 |
| Housing Width Dim. A (in) (fract) | 1-1/2 |
| Housing Width Dim. A (mm) | 38 |
| Mounting Slot Width Dim. N (in) (fract) | 7/16 |
| Mounting Slot Width Dim. N (mm) | 11 |
| Mounting Slot Length Dim. N1 (in) (fract) | 9/16 |
| Mounting Slot Length Dim. N1 (mm) | 14 |
| Housing Base Thickness Dim. H1 (in) (fract) | 9/16 |
| Housing Base Thickness Dim. H1 (mm) | 14 |
| Housing Height Dim. H0 (in) (fract) | 2-31/64 |
| Housing Height Dim. H0 (mm) | 63 |
| Bearing Inner Race Width Dim. B (in) | 1.22 |
| Bearing Inner Race Width Dim. B (mm) | 31 |
| Bearing Inner Race Width - Short Side Dim. S (in) | 0.5 |
| Bearing Inner Race Width - Short Side Dim. S (mm) | 12.7 |
| Bolt Size (in) | 3/8 |
| Bolt Size (mm) | M10 |
| Insert No. | UC204-12G R3 |
| Weight (lb) | 1.54 |
| Weight (kg) | 0.7 |
| Basic Dynamic Load Rating (Cr) lbs | 2877.55 |
| Basic Dynamic Load Rating (Cr) kN | 12.8 |
| Basic Static Load Rating (Cor) lbs | 1494.98 |
| Basic Static Load Rating (Cor) kN | 6.65 |
| Grease Fitting | 1/4 - 28 UNF |