UCPK207-22, PILLOW BLOCK-LOW CENTER
SKU: UCPK207-22 IDC
Manufacturer part number: IDC UCPK207-22
In-Stock Quantity: in stock
Quick overview
UCPK207-22, PILLOW BLOCK-LOW CENTER SETSCREWS
Overview
Product Attributes
IDC UCPK207-22
IDC Select Standard-Duty Low-Base Pillow Block
Set Screw Locking Design
Features
- One-Piece Cast Iron Housing - Solid Base
- Wide Inner Ring Bearing
- Dual Heavy-Duty Slinger-Type Contact Seals
- Cup Point Set Screws 120º Apart Lock Unit Securely to Shaft
- Fully Self-Aligning
| Shaft Diameter Dim. d (in) (fract) | 1-3/8 |
| Shaft Diameter Dim. d (mm) | 34.925 |
| Shaft Height Dim. H (in) (fract) | 1-13/16 |
| Shaft Height Dim. H (mm) | 46.0375 |
| Housing Length Dim. L (in) (fract) | 6-37/64 |
| Housing Length Dim. L (mm) | 167 |
| Mounting Hole Center-to-Center Dim. J (in) (fract) | 5 |
| Mounting Hole Center-to-Center Dim. J (mm) | 127 |
| Housing Width Dim. A (in) (fract) | 1-57/64 |
| Housing Width Dim. A (mm) | 48 |
| Mounting Slot Width Dim. N (in) (fract) | 9/16 |
| Mounting Slot Width Dim. N (mm) | 14 |
| Mounting Slot Length Dim. N1 (in) (fract) | 3/4 |
| Mounting Slot Length Dim. N1 (mm) | 19 |
| Housing Base Thickness Dim. H1 (in) (fract) | 45/64 |
| Housing Base Thickness Dim. H1 (mm) | 18 |
| Housing Height Dim. H0 (in) (fract) | 3-37/64 |
| Housing Height Dim. H0 (mm) | 91 |
| Bearing Inner Race Width Dim. B (in) | 1.69 |
| Bearing Inner Race Width Dim. B (mm) | 42.9 |
| Bearing Inner Race Width - Short Side Dim. S (in) | 0.69 |
| Bearing Inner Race Width - Short Side Dim. S (mm) | 17.5 |
| Bolt Size (in) | 7/16 |
| Bolt Size (mm) | M12 |
| Insert No. | UC207-22 |
| Weight (lb) | 3.79 |
| Weight (kg) | 1.72 |
| Basic Dynamic Load Rating (Cr) lbs | 5777.59 |
| Basic Dynamic Load Rating (Cr) kN | 25.7 |
| Basic Static Load Rating (Cor) lbs | 3439.58 |
| Basic Static Load Rating (Cor) kN | 15.3 |
| Grease Fitting | 1/4 - 28 UNF |