UCPK209-27, PILLOW BLOCK-LOW CENTER
SKU: UCPK209-27 IDC
Manufacturer part number: IDC UCPK209-27
In-Stock Quantity: in stock
Quick overview
UCPK209-27, PILLOW BLOCK-LOW CENTER SETSCREWS
Overview
Product Attributes
IDC UCPK209-27
IDC Select Standard-Duty Low-Base Pillow Block
Set Screw Locking Design
Features
- One-Piece Cast Iron Housing - Solid Base
- Wide Inner Ring Bearing
- Dual Heavy-Duty Slinger-Type Contact Seals
- Cup Point Set Screws 120º Apart Lock Unit Securely to Shaft
- Fully Self-Aligning
| Shaft Diameter Dim. d (in) (fract) | 1-11/16 |
| Shaft Diameter Dim. d (mm) | 42.8625 |
| Shaft Height Dim. H (in) (fract) | 2-1/16 |
| Shaft Height Dim. H (mm) | 52.3875 |
| Housing Length Dim. L (in) (fract) | 7-7/16 |
| Housing Length Dim. L (mm) | 189 |
| Mounting Hole Center-to-Center Dim. J (in) (fract) | 5-3/4 |
| Mounting Hole Center-to-Center Dim. J (mm) | 146 |
| Housing Width Dim. A (in) (fract) | 2-1/8 |
| Housing Width Dim. A (mm) | 54 |
| Mounting Slot Width Dim. N (in) (fract) | 9/16 |
| Mounting Slot Width Dim. N (mm) | 14 |
| Mounting Slot Length Dim. N1 (in) (fract) | 3/4 |
| Mounting Slot Length Dim. N1 (mm) | 19 |
| Housing Base Thickness Dim. H1 (in) (fract) | 25/32 |
| Housing Base Thickness Dim. H1 (mm) | 20 |
| Housing Height Dim. H0 (in) (fract) | 4-3/32 |
| Housing Height Dim. H0 (mm) | 104 |
| Bearing Inner Race Width Dim. B (in) | 1.94 |
| Bearing Inner Race Width Dim. B (mm) | 49.2 |
| Bearing Inner Race Width - Short Side Dim. S (in) | 0.75 |
| Bearing Inner Race Width - Short Side Dim. S (mm) | 19 |
| Bolt Size (in) | 7/16 |
| Bolt Size (mm) | M12 |
| Insert No. | UC209-27 |
| Weight (lb) | 5.27 |
| Weight (kg) | 2.39 |
| Basic Dynamic Load Rating (Cr) lbs | 7103.96 |
| Basic Dynamic Load Rating (Cr) kN | 31.6 |
| Basic Static Load Rating (Cor) lbs | 4631.06 |
| Basic Static Load Rating (Cor) kN | 20.6 |
| Grease Fitting | 1/8 - 27 NPT |