HOME PRODUCTS Bearings UCPK211-35, PILLOW BLOCK-LOW CENTER
UCPK211-35, PILLOW BLOCK-LOW CENTER
SKU: UCPK211-35 IDC
Manufacturer part number: IDC UCPK211-35
In-Stock Quantity: in stock
Quick overview
UCPK211-35, PILLOW BLOCK-LOW CENTER SETSCREWS
Overview
Product Attributes

IDC UCPK211-35

IDC Select Standard-Duty Low-Base Pillow Block

Set Screw Locking Design

Features

  • One-Piece Cast Iron Housing - Solid Base
  • Wide Inner Ring Bearing
  • Dual Heavy-Duty Slinger-Type Contact Seals
  • Cup Point Set Screws 120º Apart Lock Unit Securely to Shaft
  • Fully Self-Aligning
Shaft Diameter Dim. d (in) (fract)2-3/16
Shaft Diameter Dim. d (mm)55.5625
Shaft Height Dim. H (in) (fract)2-1/4
Shaft Height Dim. H (mm)57.15
Housing Length Dim. L (in) (fract)9-9/64
Housing Length Dim. L (mm)232
Mounting Hole Center-to-Center Dim. J (in) (fract)7-1/8
Mounting Hole Center-to-Center Dim. J (mm)181
Housing Width Dim. A (in) (fract)2-23/64
Housing Width Dim. A (mm)60
Mounting Slot Width Dim. N (in) (fract)45/64
Mounting Slot Width Dim. N (mm)18
Mounting Slot Length Dim. N1 (in) (fract)15/16
Mounting Slot Length Dim. N1 (mm)24
Housing Base Thickness Dim. H1 (in) (fract)29/32
Housing Base Thickness Dim. H1 (mm)23
Housing Height Dim. H0 (in) (fract)4-7/8
Housing Height Dim. H0 (mm)124
Bearing Inner Race Width Dim. B (in)2.19
Bearing Inner Race Width Dim. B (mm)55.6
Bearing Inner Race Width - Short Side Dim. S (in)0.87
Bearing Inner Race Width - Short Side Dim. S (mm)22.2
Bolt Size (in)1/2
Bolt Size (mm)M14
Insert No.UC211-35
Weight (lb)8.09
Weight (kg)3.67
Basic Dynamic Load Rating (Cr) lbs9779.19
Basic Dynamic Load Rating (Cr) kN43.5
Basic Static Load Rating (Cor) lbs6564.42
Basic Static Load Rating (Cor) kN29.2
Grease Fitting1/8 - 27 NPT