UCPSS210-31SS, PILLOW BLOCK-STAINLESS STEEL
SKU: UCPSS210-31SS IDC
Manufacturer part number: IDC UCPSS210-31SS
In-Stock Quantity: in stock
Quick overview
UCPSS210-31SS, PILLOW BLOCK-STAINLESS STEEL
Overview
Product Attributes
IDC UCPSS210-31SS
IDC Select® Standard-Duty Stainless Steel Wash-Down Pillow Block
Set Screw Locking Design
Features
- Stainless Steel Housing - Solid Base - Polished Finish
- Stainless Steel Wide Inner Ring Bearing
- All Stainless Steel, Balls & Rings 440, Retainer & Slinger 302, Set Screws 304
- Dual Heavy-Duty Slinger-Type Contact Seals & Food-Grade Grease
- Cup Point Set Screws 120º Apart Lock Unit Securely to Shaft
- Fully Self-Aligning
| Shaft Diameter Dim. d (in) | 1-15/16 |
| Shaft Height Dim. H (in) | 2.250 |
| Shaft Height Dim. H (in) (fract) | 2-1/4 |
| Housing Length Dim. L (in) | 8.1102 |
| Housing Length Dim. L (mm) | 206 |
| Mounting Hole Center-to-Center Dim. J (in) | 6.2598 |
| Mounting Hole Center-to-Center Dim. J (in) (fract) | 6-1/4 |
| Mounting Hole Center-to-Center Dim. J (mm) | 159 |
| Housing Width Dim. A (in) | 2.3622 |
| Housing Width Dim. A (in) (fract) | 2-5/8 |
| Housing Width Dim. A (mm) | 60 |
| Mounting Slot Width Dim. N (in) | 0.7874 |
| Mounting Slot Width Dim. N (mm) | 20 |
| Mounting Slot Length Dim. N1 (in) | 0.9055 |
| Mounting Slot Length Dim. N1 (mm) | 23 |
| Housing Base Thickness Dim. H1 (in) | .8266 |
| Housing Base Thickness Dim. H1 (mm) | 21 |
| Housing Height Dim. H0 (in) | 4.4488 |
| Housing Height Dim. H0 (mm) | 113 |
| Bearing Inner Race Width Dim. B (in) | 2.0315 |
| Bearing Inner Race Width Dim. B (mm) | 51.6 |
| Bearing Inner Race Width - Short Side Dim. S (in) | 0.748 |
| Bearing Inner Race Width - Short Side Dim. S (mm) | 19 |
| Bolt Size (in) | 1/2 |
| Bolt Size (mm) | M12 |
| Insert No. | SSUC210-31 |
| Weight (lb) | 8.83 |
| Basic Dynamic Load Rating (Cr) lbs | 7890 |
| Basic Static Load Rating (Cor) lbs | 5215 |
| Locking Device | Set Screw |
| Grease Fitting | 1/4 - 28 UNF |